回流路径跨平面审查
对导出的铜箔几何做参考平面连续性审查:分割缝隙、跨缝走线、无参考铜岛逐条定位,并给出圆角蛇形等长规划;离线契约报告,投产前拦截回流隐患。
Badges only claim the demo-run passed on that host; cross-host installation is handled by the adapter layer.
Preview gallery
Review return-path continuity in this exported copper geometry JSON, list straddling traces with fix priorities, and plan rounded serpentine equal-length for a DDR group with 5 mil mismatch.
Content matches the files inside the package; extracted by the publish pipeline.
LCEDA signal-integrity review bundle
Offline cores re-implemented from the LCEDA plaza SI group (references/PROVENANCE.md): eext-cross-plane-check geometry/detector and eext-quick-equal-length single-wave math. Editor-bound members (return-path-inspector route search, diff-pair assistant, radar, net-class coloring, DRC voice alert, DFM checker, testpoint guard, current-density sim) are procedures in references/procedures.md.
Cores
scripts/demo.mjs (Node >= 20, no deps) runs two checks:
- Cross-plane continuity over
{stack, tracks, pours, vias}(mil): centerline resampled every 4 mil; island = touch >= 2 distinct pour islands (>= 2 consecutive samples each); gap = > 30 mil run over no copper (suppressed within via radius + 15 mil); straddle = track edges over >= 2 islands for >= 10 mil; noref = adjacent stack layer has no copper under the first non-vicinity sample; trace = crossing with an adjacent-layer track outside copper. - Equal-length plan: target = longest route; rounded single-wave
serpentine
extra = 2n*a + 4n*(pi/2-2)*min(r, a/2),r = (width+clearance)/2, piecewise amplitude solve, tolerance 0.1 mil.
Run
node scripts/demo.mjs --out-dir <dir> [--input <json>]
Default scripts/fixtures/input.json; stdout = edaskills.report.v1;
artifacts cross-plane.json, cross-plane.svg, length-plan.csv.
When to use
- Review return paths after plane splits / layer changes in any EDA tool (export copper to the input shape via the editor API, see procedures).
- Plan length tuning before routing DDR/USB/diff pairs.
Not for: full wave impedance/field solving, via clustering route search (use return-path-inspector in-editor), or DRC replacement.
Dependencies
Demo run
node v24.19.0 · 2026/11/19
- [warning] RETURN_GAP (SIG/T2): 380 mil over no copper on reference layer at (198.0, 150.0) mil
- [warning] RETURN_NOREF (SIG/T2): no continuous reference copper on layer 15 at (10.0, 150.0) mil
- [info] LENGTH_PLAN (DQ0): 1 lobes x 75.2 mil adds 140.0 mil (target 640.0)
FAQ
Ratings & reviews
Not rated0 ratings
Sign in to rate this skill.
Sign inVersions
- v1.0.0Latest84.3 KB
首发种子版本。