ReviewFreeNewv1.0.0
高速设计评审
高速数字设计预评审:微带线阻抗计算(Hammerstad-Jensen)、阻抗容差与等长组偏差检查,附完整 SI 评审清单,输出契约报告。
Installs: 0Rating: –Updated:
Claude CodeGeneric
Badges only claim the demo-run passed on that host; cross-host installation is handled by the adapter layer.
Preview gallery
Review the microstrip impedance on this high-speed board: stackup Er=4.2, dielectric 0.2 mm, target 50 Ω±10%; check length-matching skew and give me an SI review checklist.
Content matches the files inside the package; extracted by the publish pipeline.
高速设计评审
在投板前对高速数字设计做两层评审:可计算的阻抗/等长检查, 以及必须人工(或 agent 逐项)核对的 SI 清单。
1. 收集设计参数
从 EDA 工具导出或向用户确认:
- 叠层:参考平面间距 h(mm)、介电常数 er(FR-4 约 4.2–4.5, 以板厂叠层表为准)、铜厚 t。
- 受控阻抗线:网络名、线宽、目标阻抗、容差(常见 ±10%)。
- 等长组:组名、偏差预算(mm)、各网络实际长度。
整理成 scripts/fixtures/hs-design.json 的格式。
2. 自动检查
node scripts/impedance_check.mjs --input design.json --out-dir out
- 阻抗用 Hammerstad-Jensen 微带公式(忽略铜厚,±2 Ω 量级误差, 见 references/hs-review-checklist.md 的适用边界)。
- 超出容差 → error;偏差超过容差的 60% → warning。
- 等长组偏差超预算 → error;超预算 80% → warning。
- stdout 为契约报告,out/impedance.csv 为逐线计算明细, out/impedance-curve.svg 为 Z0-线宽曲线与逐线落点。
3. 清单评审
对照 references/hs-review-checklist.md 逐项核对并记录结论 (通过/不适用/待整改)。清单覆盖回流路径、过孔残桩、参考平面 分割、串扰间距、端接、连接器过渡、去耦。自动检查不能替代清单。
4. 交付
- review-report.json + impedance.csv + 清单逐项结论。
- error 项必须给出整改建议(改线宽/改叠层/改绕线)后复检。
Rules
- 计算输入必须来自真实叠层表与布线数据;无数据时先要数据, 不得用"典型值"冒充用户设计。
- 不打印、不存储任何 API key;本 Skill 不需要第三方凭证。
- 公式是近似:±10% 容差边界附近的线必须建议场求解器或板厂 阻抗测试条复核,不得给出"精确合格"结论。
Dependencies
No dependencies
This skill works standalone.
Demo run
Passed with warnings0 errors · 2 warnings
edaskills-impedance-check 1.0.0 · 2026/11/18
- [warning] IMPEDANCE_MARGINAL (CLK_50M): Z0=53.3 ohm, deviation 6.5% near tolerance edge; verify with field solver
- [warning] LENGTH_MARGINAL (USB_PAIR): mismatch 0.500 mm uses >80% of 0.6 mm budget
- [info] MODEL_NOTE (stackup): Hammerstad-Jensen microstrip; ignores copper thickness and solder mask (typically 1-4 ohm lower in reality)
FAQ
Ratings & reviews
Not rated0 ratings
5 star
0
4 star
0
3 star
0
2 star
0
1 star
0
Sign in to rate this skill.
Sign inVersions
- v1.0.0Latest7.6 KB
首发种子版本。
License: MITSHA-256: eea6e43e4b3b1a39…
Related skills
No related skills
Skills with the same output type and use case will appear here.